KATANA Premium Bits

Join the E-Club!

NEW Products

FREE Shipping

Online Catalog

Product Reviews

Katana® Jointmaker Router Bits

Dovetail Router Bits

 katana_dovetail_router_bit
2 flute, carbide tipped. Dovetail joints are perfect for making strong joints on drawers, boxes and furniture carcasses. Makes sliding dovetails, half blind dovetails, French dovetails, etc. Bits fit most popular jigs and have extra long shanks for Leigh jig. 1/4" and 1/2" shank.

Item #
 Large
Dia.
Cut
Hght.
Cut
Angle		 Shank Price Order
#15407 1/2"  5/8" 10° 1/4" $12.00
#17705 1/2"  1/2" 14° 1/2" $13.00
#17709 3/4"  7/8" 14° 1/2" $13.95

Glue Joint Router Bit
katana_reverse_glue_joint_router_bit

Glue Joint Instructions (PDF)

Rated:

Review this product...

2 flute, carbide tipped. Produce a strong glue edge-joint for door panels, table tops, and cabinets. Center the cutter on the stock and cut both tongue and groove in one pass. Flip wood, cut matching side, then assemble. Use with stock up to 1-1/4" thick. FREE Instruction link at right. 1/2" shank. See Katana® Jointmaking Set!

Detailed glue joint instructional Video.

Item #
 Large
Dia.
Cut
Hght.		 Shank Price Order
#18846 1-1/2" 1-3/16" 1/2" $39

Set-Up Block For Katana® Glue Joint Bit #18846
Save time, effort and wood. The pre-cut joint profile allows quick, proper height adjustments with accurate setup everytime. Set-Up Block will not distort or swell. For 3/4" stock. Instructions included.

Item Set-Up Block Profile Price
#9781 Set-Up Block for Katana® Glue Joint bit $10.95

all customer reviews and ratings

Average Customer Rating: (1 reviews)
Add your own review for this product

Great Bit (5/5), Jul 1, 2010

By Rick ( TX US)

This Bit worked flawlessly. Used to make glue up panels for an outdoor door for a stone wall. Highly recommend this bit.

Add your own review for this product

Drawer Lock Router Bit
katana_drawer_lock_router_bit

Drawer Lock Instructions (PDF)

No rating yet... Be the first to rate this product!
2 flute, carbide tipped. Making strong drawers is easy with our Drawer Lock Bit. Rout the drawer front and sides with the bit mounted in a table. Attach sides to front of drawer with perfectly mated, strong glue joints. Minimum stock thickness is 3/8" for drawer sides and 1/2" for drawer
front. FREE Instruction link at right. 1/2" shank. See Katana® Jointmaking Set!

How-To Video. Learn how to make 2 different drawer front styles.

Item #
 Large
Dia.
Cut
Hght.		 Shank Price Order
#18850 2" 1/2" 1/2" $39

Set-Up Block For Katana® Drawer Lock #18850
Save time, effort and wood. The pre-cut joint profile allows quick, proper height adjustments with accurate setup everytime.

Item Set-Up Block Profile Price
#9784 Katana® Drawer Lock bit $10.95

all customer reviews and ratings

No rating yet... Be the first to rate this product!

Lock Miter Router Bits
katana_lock_mitre_router_bit
Rated:

Review this product...

2 flute, carbide tipped. To join materials at 90° by cutting a 45° miter and a perfect matching tongue and groove glue joint. This extremely strong joint not only increases mechanical strength, but also increases glue surface area and automatically aligns parts. Make frames, boxes, right angle and parallel angle joints. Item #17849 joins stock from 7/16" to 11/16". Item #17850 joins stock from 5/8" to 1-1/16" thick. FREE Instruction link at right. 1/2" shank. See Katana® Jointmaking Set!

Lock Miter Instructions (PDF)

Lock Miter instructional Video.

Item #
 Large
Dia.
Cut
Hght.		 Stock
Thickness 		Shank Price Order
#17849 1-3/4" 3/4" 7/16"-11/16" 1/2" $49
#17850 2-3/4" 1-3/16" 5/8"-11/16" 1/2" $55

Set-Up blocks for Katana® Lock Mitre bits are featured below.

Precision balanced for smooth vibration free cuts. Minimizing vibration produces a cleaner, higher quality cut, a sharper cutting edge, and a longer cutter life

all customer reviews and ratings

Average Customer Rating: (2 reviews)
Add your own review for this product

Great (5/5), Oct 15, 2008

By Eric Klein (Holly Springs NC US)

With the setup block it was not difficult to set up. The resulting miters are very tight. I used on plywood and there was some splintering, but no more than expected. Just took more passes to reduce the splintering.

Lock Miter Router Bits (5/5), Oct 11, 2008

By Bob Carey (Levant ME US)

setup was a little tricky. The resulting joint is very strong. The pdf file is indispensable to the usage of this bit. Excellent product.

Add your own review for this product

Set-Up Blocks For Katana® Lock Mitre Router Bits
Save time, effort and wood. The pre-cut joint profile allows quick, proper height adjustments with accurate setup everytime. Set-Up Block will not distort or swell. Instructions included.
Item Use with stock size Price
#9754 Lock Mitre Set-Up Block for 1/2" & 3/4" stock (Lock Miter Bit #17850) $10.95
#9755 Lock Mitre Set-Up Block for 1/2" & 11/16" stock (Lock Miter Bit #17849) $10.95

Jointmaker 3 Piece Router Bit Set
katana_jointmaker_router_bit_set

Lock Miter Instructions (PDF)
 Glue Joint Instructions (PDF)
 Drawer Lock Instructions (PDF)

No rating yet... Be the first to rate this product!
GET ALL 3 JOINTMAKING BITS AT ONE GREAT PRICE!
3 PIECE 1/2" SHANK JOINTMAKER SET
SET #14511 - Includes the following items (all of which are featured on this page): 18846 (Glue Joint), 18850 (Drawer Lock), 17850 (Lock Mitre). Wood storage box included. Individual Price $133. SAVE $13! ONLY
$119.95

Set-Up Blocks For Katana® Jointmaking Set
The pre-cut joint profile allows quick, proper height adjustments with accurate setup everytime. Will not distort or swell. Instructions included.
Item Set-Up Blocks Price
#9754 Lock Mitre Set-Up Block for 1/2" & 3/4" stock $10.95
#9784 Drawer Lock Set-Up Block $10.95
#9781 Glue Joint Set-Up Block $10.95

all customer reviews and ratings

No rating yet... Be the first to rate this product!